CCTV

IMPORX CCTV

• Auto Tracking PTZ IP Kamera
• 1080P Full HD
• 20X Optische Zoom
• Wetterfeste mit Heizlüfter und Wischer
• Infrarotlicht-Distanz: 120 m
• Mit ONVIF und Blue Iris Unterstützung

Connecting the Cam to a Windows PC

• the cam webinterface only works with Windows Internet Explorer (not edge, no mac, no linux)
• connect cam directly via ethernet cable with pc, no internet needed
• set your IP v4 address to 192.168.0.10 (gateway doesnt matter, set it to 192.168.0.1 )
• open Internet Explorer and connect to the cam by typing the following IP in the address bar: 192.168.0.99
• the cam webinterface should appear, login: admin password: admin
• to activate the video you need to install a custom Internet Explorer plugin.
  • Click 'download plugin' in center of interface (where video is supposed to be)
  • it will download from the cam (not internet) save to disk, install, restart browser (or refresh page)
  • video of the cam should be on now
  • (some PC have security settings preventing to install the plugin, check windows settings to activate 'not save' software)

Set the Cam to constantly Auto-Tracking

• go to the tracking tab (top right corner, little walking man)
• use the arrow controls to make the cam point to the room
  • (which would be straight down, if it hung vertically from a building)
• enable zoom, set to 8 or 10
• return 5 seconds
• save scene
• enable tracking, 'on'
• the cam should be auto track movement now, test it.
• to avoid the cam going into parking position doing nothing we need to go into system settings
  • go to the first tab in right panel, and save the current setting to scene 1
  • then go to left hand panel "system settings"
  • select 'PTZ' tab
  • set return to parking to 5 min
  • change 'do nothing' to 'call scene 1'