Difference between revisions of "VMusic2 Anleitung"
From Digipool-Wiki
| Line 1: | Line 1: | ||
<source lang="c"> | <source lang="c"> | ||
| + | |||
| + | // vMusic-EasyJukebox by www.olafval.de more info: www.vinculum.com/prd_vmusic1.html | ||
| + | |||
| + | #include <SoftwareSerial.h> | ||
| + | |||
// USB-stick max 4 G | // USB-stick max 4 G | ||
// Name Songs "001.mp3" "002.mp3" . . . | // Name Songs "001.mp3" "002.mp3" . . . | ||
| Line 6: | Line 11: | ||
// red cable to 5V | // red cable to 5V | ||
// black cable to GND | // black cable to GND | ||
| − | #define VMUSIC_RX | + | #define VMUSIC_RX 14 // yellow cable ti Analog in 0 |
| − | #define VMUSIC_TX | + | #define VMUSIC_TX 15 // orange cable ti Analog in 1 |
| + | |||
| + | |||
| + | // set up a new serial port | ||
| + | SoftwareSerial mySerial = SoftwareSerial(VMUSIC_RX, VMUSIC_TX); | ||
| + | |||
| + | void setup() { | ||
| + | Serial.begin(9600); // opens serial port, sets data rate to 9600 bps | ||
| + | |||
| + | // define pin modes for tx, rx, led pins: | ||
| + | pinMode(VMUSIC_RX, INPUT); | ||
| + | pinMode(VMUSIC_TX, OUTPUT); | ||
| + | |||
| + | // set the data rate for the SoftwareSerial port | ||
| + | mySerial.begin(9600); | ||
| + | |||
| + | mySerial.print("VSV"); // set volume | ||
| + | mySerial.print(0,BYTE); // should be between 0 (loud) and 254 (mute) | ||
| + | mySerial.print(0x0D,BYTE); | ||
| + | } | ||
| + | |||
| + | void loop() { | ||
| + | Serial.println("Song_1"); | ||
| + | mySerial.print("VPF 001.mp3"); // play song nr one | ||
| + | mySerial.print(0x0D,BYTE); | ||
| + | delay(9000); | ||
| + | } | ||
| + | |||
</source> | </source> | ||
Revision as of 16:34, 6 July 2012
<source lang="c">
// vMusic-EasyJukebox by www.olafval.de more info: www.vinculum.com/prd_vmusic1.html
- include <SoftwareSerial.h>
// USB-stick max 4 G // Name Songs "001.mp3" "002.mp3" . . . // cut the blue // conect the brown to the reen cable // red cable to 5V // black cable to GND
- define VMUSIC_RX 14 // yellow cable ti Analog in 0
- define VMUSIC_TX 15 // orange cable ti Analog in 1
// set up a new serial port
SoftwareSerial mySerial = SoftwareSerial(VMUSIC_RX, VMUSIC_TX);
void setup() {
Serial.begin(9600); // opens serial port, sets data rate to 9600 bps
// define pin modes for tx, rx, led pins:
pinMode(VMUSIC_RX, INPUT);
pinMode(VMUSIC_TX, OUTPUT);
// set the data rate for the SoftwareSerial port
mySerial.begin(9600);
mySerial.print("VSV"); // set volume
mySerial.print(0,BYTE); // should be between 0 (loud) and 254 (mute)
mySerial.print(0x0D,BYTE);
}
void loop() {
Serial.println("Song_1");
mySerial.print("VPF 001.mp3"); // play song nr one
mySerial.print(0x0D,BYTE);
delay(9000);
}
</source>
