Difference between revisions of "EBroidery"
From Digipool-Wiki
(→LED Tile Pattern Designer) |
(→LED Tile Pattern Designer) |
||
Line 38: | Line 38: | ||
[https://editor.p5js.org/olafval/present/gceS_BCQT LINK] | [https://editor.p5js.org/olafval/present/gceS_BCQT LINK] | ||
+ | |||
+ | The LED Tile Pattern Designer is a rudimentary online tool for designing patterns in 256 brightness levels. | ||
+ | |||
+ | * Momentan ist das Raster mit 2 x 3 LEDs vorgeben (6 Werte) | ||
+ | * Brightness levels 0 - 255 | ||
<br> | <br> |
Revision as of 13:55, 29 May 2019
Materialliste
- Technisches Garn
- elektrisch leitend
- Widerstand: < 100 Ω/m
- Madeira 420 HC 12 1.000 m LINK
- Arduino Borad
- Adafruit ItsyBitsy M4
- 16 €
- LED
- HuiYuan 0805W2C-KHC-B SMD-LED 0805
- Weiß 460 mcd
- 120 °
- 30 mA 3.2 V
- 0,45 €
- LINK
- USB Kabel
- Micro USB Typ B
Setup der Arduino Software für das Adafruit ItsyBitsy M4
- Unter VOREINSTELLUNGEN / BORDVERWALTER URL folgende URL eintragen: https://adafruit.github.io/arduino-board-index/package_adafruit_index.json
- Unter WERKZEUG / BORD / BORDVERWALTER / "Adafruit SAMD Boards" installieren
- Unter WERKZEUG / BORD / das "Adafruit ItsyBitsy M4 (SAMD51)" auswählen
- Unter WERZEUGE / PORT / das "Adafruit ItsyBitsy M4 (SAMD51)" auswählen
LED Tile Pattern Designer
The LED Tile Pattern Designer is a rudimentary online tool for designing patterns in 256 brightness levels.
- Momentan ist das Raster mit 2 x 3 LEDs vorgeben (6 Werte)
- Brightness levels 0 - 255