Difference between revisions of "CCTV"

From Digipool-Wiki
Jump to: navigation, search
(IMPORX CCTV)
Line 12: Line 12:
 
<br>
 
<br>
  
== PART 1: Connecting the Cam to a Windows PC ==
+
== Connecting the Cam to a Windows PC ==
  
the cam webinterface only works with Windows Internet Explorer (not edge, no mac, no linux)
+
* the cam webinterface only works with Windows Internet Explorer (not edge, no mac, no linux)
connect cam directly via ethernet cable with pc, no internet needed
+
* connect cam directly via ethernet cable with pc, no internet needed
set your IP v4 address to 192.168.0.10 (gateway doesnt matter, set it to 192.168.0.1 )
+
* set your IP v4 address to '''192.168.0.10''' (gateway doesnt matter, set it to 192.168.0.1 )
open internet explorer and connect to the cam by typing the following ip in the address bar: 192.168.0.99
+
* open Internet Explorer and connect to the cam by typing the following IP in the address bar: '''192.168.0.99'''
the cam webinterface should appear, login: admin password: admin
+
* the cam webinterface should appear, login: '''admin''' password: '''admin'''
to activate the video click you need to install a custom internet explorer plugin. click 'download plugin' in center of interface (where video is supposed to be)
+
* to activate the video you need to install a custom Internet Explorer plugin.  
it will download from the cam (not internet) save to disk, install, restart browser (or refresh page)
+
** Click 'download plugin' in center of interface (where video is supposed to be)
video of the cam should be on now (some PC have security settings preventing to install the plugin, check windows settings to activate 'not save' software)
+
** it will download from the cam (not internet) save to disk, install, restart browser (or refresh page)
PART 2: set the cam to constantly auto tracking. this step is only neccessary with a brand new cam
+
** video of the cam should be on now  
go to the tracking tab (top right corner, little walking man)
+
** (some PC have security settings preventing to install the plugin, check windows settings to activate 'not save' software)
use the arrow controls to make the cam point to the room (which would be straight down, if it hung vertically from a building)
+
enable zoom, set to 8 or 10
+
return 5 seconds
+
save scene
+
enable tracking, 'on'
+
the cam should be auto track movement now, test it.
+
to avoid the caming going into parking position doing nothing we need to go into system settings
+
  
go to the first tab in right panel, and save the current setting to scene 1
+
<br>
then go to left hand panel "system settings"
+
select 'PTZ' tab
+
set return to parking to 5 min
+
change 'do nothing' to 'call scene 1'
+
  
https://www.miecctv.co.uk/downloads.html
+
== Set the Cam to constantly Auto-Tracking ==
 +
 
 +
* go to the tracking tab (top right corner, little walking man)
 +
* use the arrow controls to make the cam point to the room
 +
** (which would be straight down, if it hung vertically from a building)
 +
* enable zoom, set to 8 or 10
 +
* return 5 seconds
 +
* save scene
 +
* enable tracking, 'on'
 +
* the cam should be auto track movement now, test it.
 +
* to avoid the cam going into parking position doing nothing we need to go into system settings
 +
** go to the first tab in right panel, and save the current setting to scene 1
 +
** then go to left hand panel "system settings"
 +
** select 'PTZ' tab
 +
** set return to parking to 5 min
 +
** change 'do nothing' to 'call scene 1'
 +
 
 +
<br>

Revision as of 07:37, 15 February 2021

IMPORX CCTV

  • Auto Tracking PTZ IP Kamera
  • Blue Iris Unterstützung
  • 1080P Full HD
  • 20X Optische Zoom
  • Kamera ONVIF High Speed
  • Wetterfeste mit Heizlüfter und Wischer
  • 400ft IR Distanz


Connecting the Cam to a Windows PC

  • the cam webinterface only works with Windows Internet Explorer (not edge, no mac, no linux)
  • connect cam directly via ethernet cable with pc, no internet needed
  • set your IP v4 address to 192.168.0.10 (gateway doesnt matter, set it to 192.168.0.1 )
  • open Internet Explorer and connect to the cam by typing the following IP in the address bar: 192.168.0.99
  • the cam webinterface should appear, login: admin password: admin
  • to activate the video you need to install a custom Internet Explorer plugin.
    • Click 'download plugin' in center of interface (where video is supposed to be)
    • it will download from the cam (not internet) save to disk, install, restart browser (or refresh page)
    • video of the cam should be on now
    • (some PC have security settings preventing to install the plugin, check windows settings to activate 'not save' software)


Set the Cam to constantly Auto-Tracking

  • go to the tracking tab (top right corner, little walking man)
  • use the arrow controls to make the cam point to the room
    • (which would be straight down, if it hung vertically from a building)
  • enable zoom, set to 8 or 10
  • return 5 seconds
  • save scene
  • enable tracking, 'on'
  • the cam should be auto track movement now, test it.
  • to avoid the cam going into parking position doing nothing we need to go into system settings
    • go to the first tab in right panel, and save the current setting to scene 1
    • then go to left hand panel "system settings"
    • select 'PTZ' tab
    • set return to parking to 5 min
    • change 'do nothing' to 'call scene 1'