Difference between revisions of "CCTV"

From Digipool-Wiki
Jump to: navigation, search
(Created page with " == IMPORX CCTV == Auto Tracking PTZ IP Kamera,Unterstützung Blue Iris,1080P Full HD 20X Optische Zoom Kamera ONVIF High Speed Wetterfeste Kamera,400ft IR Distanz,mit Heizl...")
 
Line 28: Line 28:
 
set return to parking to 5 min
 
set return to parking to 5 min
 
change 'do nothing' to 'call scene 1'
 
change 'do nothing' to 'call scene 1'
 +
 +
https://www.miecctv.co.uk/downloads.html

Revision as of 20:56, 14 February 2021

IMPORX CCTV

Auto Tracking PTZ IP Kamera,Unterstützung Blue Iris,1080P Full HD 20X Optische Zoom Kamera ONVIF High Speed Wetterfeste Kamera,400ft IR Distanz,mit Heizlüfter und Wischer

PART 1: connecting the cam to a windows PC the cam webinterface only works with Windows Internet Explorer (not edge, no mac, no linux) connect cam directly via ethernet cable with pc, no internet needed set your IP v4 address to 192.168.0.10 (gateway doesnt matter, set it to 192.168.0.1 ) open internet explorer and connect to the cam by typing the following ip in the address bar: 192.168.0.99 the cam webinterface should appear, login: admin password: admin to activate the video click you need to install a custom internet explorer plugin. click 'download plugin' in center of interface (where video is supposed to be) it will download from the cam (not internet) save to disk, install, restart browser (or refresh page) video of the cam should be on now (some PC have security settings preventing to install the plugin, check windows settings to activate 'not save' software) PART 2: set the cam to constantly auto tracking. this step is only neccessary with a brand new cam go to the tracking tab (top right corner, little walking man) use the arrow controls to make the cam point to the room (which would be straight down, if it hung vertically from a building) enable zoom, set to 8 or 10 return 5 seconds save scene enable tracking, 'on' the cam should be auto track movement now, test it. to avoid the caming going into parking position doing nothing we need to go into system settings

go to the first tab in right panel, and save the current setting to scene 1 then go to left hand panel "system settings" select 'PTZ' tab set return to parking to 5 min change 'do nothing' to 'call scene 1'

https://www.miecctv.co.uk/downloads.html